Free Dodge Durango Radio Code

Which radio is in your Durango?

Radio names are what is written on the fascia, not the name of the company that built the unit — a “6000 CD” or an “RCD 300” is what you see in the car. Unit fitment varies by market and trim, so treat the list as the usual case and let the serial decide: it is the serial that determines the code, not the model.

Dodge Durango radio code by year

From 2008 to 2020 the Durango came in 2 generations, and the factory radio — and with it the serial you need — changed along the way. Find your year below.

Dodge Durango HB radio code (2008–2009)

If your Durango is from 2008–2009, it is the HB. The radio fitted was usually one of: MyGIG REN, RER (Harman). The serial reads T00BE…; label on the top of the unit — the radio has to come out of the dash. Send us that serial: the code is free by email within 24 hours, or on the page straight away if you pay to skip the wait.

Dodge Durango WD radio code (2011–2020)

If your Durango is from 2011–2020, it is the WD. The radio fitted was usually one of: Uconnect 430/730N, Uconnect 8.4 RA3/RA4 (Harman), Uconnect 7.0 / 8.4 (Delphi). The serial reads T00BE… / T0MYD…; label on the casing; the whole serial is all we need. Send us that serial: the code is free by email within 24 hours, or on the page straight away if you pay to skip the wait.

How to enter the code in your Durango

1. Switch the ignition to RUN and the radio on, and wait for CODE. If a touchscreen says Radio Locked, Please Start Vehicle, start the engine — that is not a code request.
2. Alpine units (label TQ… or TC…): press the preset whose number is each digit, once — for 5452 press 5, 4, 5, 2. These codes use only the digits 1–5 (five presets) or 1–6 (six presets). There is no confirm button: the radio starts after the fourth digit.
3. Other preset radios: press the preset buttons that match the digits, in order. If the radio does not start after the last digit, tell us what the display shows rather than trying other keys.
4. Uconnect touchscreens: type the four digits on the screen and press the confirm key if one appears.
5. After three wrong codes the radio shows WAIT: leave the ignition in RUN and the radio on for 30 minutes without a break (older Alpine units up to two hours). The 4-digit DATE CODE on the label is not your radio code.

• Digit keys
• Shows the serial on the display

Careful: most units lock for good after about ten wrong attempts. If a code does not take, stop and email us before trying again.

Other Dodge models

Dodge Durango radio code: questions

Where is the serial number on a Dodge Durango radio?

HB (2008–2009): T00BE…, label on the top of the unit — the radio has to come out of the dash. WD (2011–2020): T00BE… / T0MYD…, label on the casing; the whole serial is all we need.

Is the Dodge Durango radio code free?

Yes. Every code we can answer is free and emailed 24 hours after you order; a small fee only skips the wait.

How do I enter the radio code in a Dodge Durango?

Switch the ignition to RUN and the radio on, and wait for CODE. If a touchscreen says Radio Locked, Please Start Vehicle, start the engine — that is not a code request. Alpine units (label TQ… or TC…): press the preset whose number is each digit, once — for 5452 press 5, 4, 5, 2. These codes use only the digits 1–5 (five presets) or 1–6 (six presets). There is no confirm button: the radio starts after the fourth digit. Other preset radios: press the preset buttons that match the digits, in order. If the radio does not start after the last digit, tell us what the display shows rather than trying other keys. Uconnect touchscreens: type the four digits on the screen and press the confirm key if one appears. After three wrong codes the radio shows WAIT: leave the ignition in RUN and the radio on for 30 minutes without a break (older Alpine units up to two hours). The 4-digit DATE CODE on the label is not your radio code.